WOOD SPLITTERS INDUSTRIAL

In the company "Artmash" LLC, you can buy a wood splitter at the cost of the manufacturer. Our company manufactures rack and pinion cleavers, which are also called inertial or kinetic. The main advantages of this design are high operating speed, ease of operation, safety, low maintenance cost (compared to hydraulic analogues).

Wood splitters will help to speed up and facilitate the procurement of firewood on an industrial scale. Productivity - 15-30 m3 per shift (8-hour working day). They cope with the splitting of any kind of wood, including the roots of old garden trees. Each cleaver is tested before painting and commissioning.

Rack wood splitter at the client of LLC

To buy rack log splitter from «Artmash» Ltd

We offer to purchase 4 types of inertial cleavers from us. We manufacture equipment that runs on electricity and / or gasoline. Wood splitters "Artmash" are used in households, wood-fired boiler houses, firewood procurement enterprises, garden and landscape organizations.

In LLC "Artmash" you can buy an industrial rack and pinion wood splitter, at the cost of the manufacturer, which compares favorably with analogues:

§	The structure is made of thick metal. At the base - I-beam 18 mm. Total weight - 225-280 kg.

§	Two 42 kg flywheels provide high kinetic energy and 12 ton impact.

§	The tooth of the gear wheel of the wood splitter is open, which, together with special steel and hardening, makes it possible to give a guarantee of 500 cubic meters of firewood. If you break it earlier, we will replace it for free.

§	The rack tooth profile is original, selected taking into account the experience of dozens of users over the course of several years. We buy special steel, carry out heat treatment. The guarantee is 500 cubic meters.

§	The travel speed of the staff is limited for the safety of the user. But the blow is struck every 1.5 seconds.

§	All bearings are housed in hardened housings that take the load. This way the bearings last longer.

§	The wood splitter cleaver is self-sharpening due to the correct cutting edge angle.

The design solutions used make it possible to cope with the splitting of various woods, from acacia to knotty oak and hornbeam, without any problems.

With minimal maintenance (greasing the rack 3 times per shift, checking the gap once a week), the log splitter has been working every day for hundreds of our customers for years.

HOW TO WORK WITH THE "ARTMASH"

Algorithm of operator actions:

1	Place the log on the desktop. The fibers should run along the bed. We do not recommend directing the cleaver to the center of the knot; it is more efficient to split the log next to the knot.
2	Actuate the push rod by pulling the lever towards you. At the moment of impact, the operator must be near the engine block of the wood splitter. This guarantees its safety.
3	As a result of the created force of 12 tons, the log is split into two parts. If the log is not completely split, you must wait until the carriage returns to its original position and press the lever again. In difficult cases, it may be necessary to make 4-5 strikes.
4	If the log is not completely split and remains on the cleaver, it is enough to place a small pig between it and the carriage and press the lever again. After the impact, the log will move and split to the end.

If two operators are using the wood splitter, they should agree in advance on responsibilities and fast signals. A well-coordinated team is able to split 1 firewood storage meter in 11 minutes.

Inexpensive wood splitters LLC

The advantages of rack log splitters

The main advantages of «Artmash» Ltd equipment are as follows:

✓	High level of productivity – for 8 working hours under average pace 1 operator can produce up to 25 m3 of wood.
✓	Work efficiency – electrical engine consume about 1-1.5 kW, petrol engine – 250 gr (in summer)- 300 gr (in winter) of petrol per hour.
✓	Independence from temperature - the wood splitter functions normally from -30 ° to + 50 ° C. The equipment can be used all year round outdoors or under a shed.
✓	Equipment longevity – the first wood splitters have been used since 2013. The gear and rack, subject to heavy loads, are capable of processing up to 4,000 cubic meters.

You can buy a combined kinetic cleaver with two motors, or a model with one motor (electric, gasoline). All units and mechanisms (except for buttons, motors, wheels) are manufactured at the own production of LLC "Artmash". You can find out more about the design of the rack and pinion log splitter by watching the video on our YouTube channel:

The Artmash plant also produces belt-scraper conveyors for firewood. The basic model is suitable for loading the most common trucks. If the client's transport is non-standard, we can change the size of the equipment. One transporter is capable of serving two woodbreakers at the same time.

The advantages of addressing to us

Choosing our company, you get the opportunity:

⚙	To get equipment modification you need we will increase the frame for splitting firewood by 800 mm; install your motor; let's paint in one color.

$	To buy log splitter and other devices at the manufacturer`s price we have a closed production cycle; we do not use contractor`s service.

✓	To make use of warranty and post-warranty service batches of racks and gears are produced constantly; handles, carriages, springs are available and on order.

To buy inexpensive productive rack log splitter (electrical or petrol) with delivery all over the world, contact us.