We call you back in 30 minutes
Request a call
Model: ShTP-0,6
Voltage: 380 V
Motor capacity: 2,05 kW, 1500 revolutions
Yield capacity: up to 3000 kg/h
Weight: 200 kg
Hopper capacity: 0,6 m3
Dimensions: 2800*750*1600 mm
⚙ increase the unloading height;
⚙ install on a high support;
⚙ change the size of the bunker;
⚙ we will make a cover for the bunker;
⚙ connect the chopper.
Consider your suggestions for modification.
Model: ShTP-1,5
Voltage: 380 V
Engine power: 2.2 kW, 1500 rpm; 0.55 kW, 1500 rpm
Productivity: up to 6000 kg/hour
Weight: 450 kg
Hopper volume: 1.5 m3
Equipment dimensions: 2150 * 1450 * 1900 mm
⚙ increase the unloading height;
⚙ change the size of the bunker;
⚙ we will make a cover for the bunker;
⚙ connect the chopper.
Each auger of this model can be made with two heads.
Model: ShTP-3-2
Voltage: 380 V
Engine power: 5.1 kW, 1500 rpm
Productivity: up to 8 000 kg/h
Weight: 800 kg
Hopper capacity: 3 m3
Equipment dimensions: 3100*2300*1940 mm
⚙ increase the volume of the bunker;
⚙ we will make a cover for the bunker;
⚙ we will paint in the color of your choice (blue, bronze).
A plug can be installed instead of one feeding auger. Take the other neck when purchasing an additional granulator.
Model: ShTP-ZK-0,6, ShTP-ZK-1
Voltage: 380 V
Yield capacity: up to 3000 kg/h
Mixing capacity: up to 1000 kg/h
Feed screw motor power: 0.55 kW
Mixer motor power: 2.2 kW
Hopper capacity: 0.6 cubic meters
Dimensions: 2800*750*1600 mm
Weight: 220 kg
⚙ change the unloading height;
⚙ install weight sensors;
⚙ Supplement with automation with recipes;
⚙ connect the chopper;
⚙ increase capacity;
⚙ we will make a reinforced bunker.
The mixing auger can become the basis for a semi-automatic granulation complex.
Model: DGM-220
Voltage: 220/380V
Motor power: 1,1 kW
Feeding capacity: up to 1000 kg/h
Mixing capacity: up to 500 kg/h
Hopper volume: 220 l
Maximum loading of raw materials: 180 l
Dimensions: 1255x530x1860 mm
Weight: 100 kg
⚙ increase the size of the bunker;
⚙ we will paint in the color of your choice (blue, green, bronze).
Consider your suggestions for modification.
Precision filling augers are used in feed and fuel pellet production lines for dosed feed of raw materials for further processing. They are suitable for use with granulators, grinders, weighing machines, oil presses, briquetting machines and other equipment.
It is profitable to buy an auger of precise loading at the cost of the manufacturer and with a guarantee of 12 months, you can in the company "Artmash". We manufacture equipment of any modification in 2-5 weeks. We provide warranty and post-warranty maintenance of equipment for farmers and livestock breeders.
At the plant of the company "Artmash", auger variants are produced for home, farm and high-performance pelletizing lines. For each granulator, equipment has been developed that is optimal in terms of performance.
| ∞ | Mixing auger with 220 l hopper for households and small farms. Powered by a three-phase network, modification is possible for 220 V. The feed is carried out when the auger is installed above the granulator, it is regulated by opening the gate. Compatible with models from 4 kW to 15 kW. |
| ∞ | Feed auger with hopper 0.6 m3. Suitable for large and medium-sized farms, as well as workshops for the processing of furniture or agricultural waste. Suitable for granulators from 11 kW to 22 kW. There is a modification of this auger with a mixing function as in previous products. Starting with this model, the feed is through the neck and is regulated by a frequency converter. |
| ∞ | Fine auger with 1.5 m3 hopper. Suitable for medium and large livestock farms, as well as enterprises for the wholesale production of pellets. It is used in granulation lines with a 1.5 m3 mixer to ensure complete discharge. Recommended for granulators 22-37 kW. A modification is provided for servicing two granulators. |
| ∞ | Feeding auger with 3 m3 hopper. Installed in high-performance lines for the wholesale production of feed and fuel pellets. It is used in conjunction with mixers 3 m3 and granulators 22-37 kW. The basic model is two-headed, but instead of one neck, we can install a plug. |
Each auger model can be modified to suit your needs. We will adjust the height of loading or unloading, increase the volume of the bunker, and ensure compatibility with the equipment you already have.
The main advantages of the equipment produced in «Artmash» Ltd:
| ✓ |
Fine adjustment of the feed. It is easy to find the optimal one for the granulator. |
| ✓ |
Versatility of usage. Any types of raw material can be poured into it (feed, sawdust, waste). |
| ✓ |
Efficiency and convenience. The equipment consumes a minimal quantity of energy, makes almost no noise. |
| ✓ |
Simplicity of usage. Doesn't require complicated maintenance. |
Thanks to the metering auger, the wear of consumables (matrix, rollers) is reduced, the load on the granulator motor is reduced and its performance is increased. The equipment facilitates the work of the pellet mill operator and enables him to perform other tasks.
Private customers and large companies choose «Artmash» Ltd because here are:
| Δ |
Individual equipment production (based on customer needs, we make changes to basic models and develop new products) |
| Δ |
Convenient ways of payment (on account with VAT or without VAT or cash payment at office) |
| Δ |
Delivery over the world (passing cargo, transport companies in the country, international logistics companies) |
| Δ |
Professional consultations (our specialists will answer all questions about the cost, configuration, features of the auger, advise a specific model, explain the modification possibilities) |
To order a precision loading auger for a line of agricultural equipment at the manufacturer's price with delivery in the country and abroad, contact the managers of Artmash LLC.
Home
