We call you back in 30 minutes
Request a call
Model: UPR-4-220
Voltage: 220 В
Motor capacity: 4 kW 3000 revolutions
Yield capacity
Sieve diameter: 4, 6, 8 mm
Weight: 100 kg
Dimensions: 1450*650*900 mm
⚙ we will remove the grain bunker;
⚙ change the height of the supports;
⚙ paint in the color of your choice (blue, green, bronze).
Consider your suggestions for modification.
Model: UPR-4-380
Voltage: 380 V
Motor capacity: 4 kW 3000 revolutions
Yield capacity grass (straw, hay): 100-130 kg/h
Yield capacity grain: 250-350 kg/h
Sieve diameter: 4, 6, 8 mm
Weight: 100 kg
Dimensions: 1450*650*900 mm
⚙ we will remove the grain bunker;
⚙ change the height of the supports;
⚙ paint in the color of your choice (blue, green, bronze).
Consider your suggestions for modification.
HAMMERS OF STEEL HARDOKS 500
Model: UPR-7.5-Ts
Voltage: 380 V
Motor capacity: 7.5 kW 3000 revolutions
Yield capacity:
Sieve diameter: 4, 6, 8 mm
Weight: 140 kg
Dimensions: 2700*700*1100 mm
Modification with 11 kW motor is available.
⚙ install an 11 kW motor;
⚙ we will provide unloading in 1 bag, 2 bags or bunker;
⚙ paint in the color of your choice (blue, green, bronze).
Consider your suggestions for modification.
HAMMERS OF STEEL HARDOKS 500
Model: DRM-11-B
Voltage: 380 V
Motor capacity: 11 kW 3000 revolutions
Yield capacity:
Sieve diameter: 4, 6, 8 mm
Hopper capacity: 250 L
Weight: 230 kg
Dimensions: 2400*1200*1350 mm
⚙ install a 15 kW motor;
⚙ we will provide unloading in 1 bag, 2 bags or bunker;
⚙ paint in the color of your choice (blue, green, bronze).
Can be sold without table, corn cob insert, hay bin, or other parts.
HAMMERS OF STEEL HARDOKS 500
Voltage: 380 V
Performance:
Fraction size: 4, 6, 8
⚙ we will select a 7.5-15 kW grinder;
⚙ we will make a reinforced mixing auger;
⚙ reduce the height of the cyclone;
⚙ paint in the color of your choice (blue, green, bronze).
For this complex, you can choose a granulator 4-15 kW and make a semi-automated mini-line of granulation.
HAMMERS OF STEEL HARDOKS 500
Voltage: 380 V
Performance:
Fraction size: 4, 6, 8
⚙ we will select a 7.5-15 kW grinder;
⚙ we will make a reinforced mixing auger;
⚙ reduce the height of the cyclone;
⚙ paint in the color of your choice (blue, green, bronze).
For this complex, you can choose a granulator 4-15 kW and make a automated mini-line of granulation.
Universal grinders “Artmash” are feed cutters designed for crushing both grain and grass feeds. Such equipment is worth buying for a household or small farm, where productivity is not needed more than 500 kg/h.
Our feed cutters undergo strict quality control, so all possible defects are eliminated at the factory. We deliver products not only in Ukraine, but also in 20 countries with the execution of all the necessary documents.
You can order such standard models from us:
| ⌾ |
Feed cutters on wheels with a power of 4 kW. These are varieties with a productivity of up to 350 kg/h for grain and up to 130 kg/h for grass feeds. Ideally suited for homestead farming. Equipped with separate bins for cereals and herbs, as well as a mini-cyclone with a conclusion to one bag. Thanks to the wheels, they easily move around the territory, so for work it is not necessary to allocate a special zone. |
| ⌾ |
Feeding cutters with legs and with a full-sized cyclone with a power of 7.5 - 11 kW. Such models are more productive (up to 500 kg/h on grain and up to 300 kg/h on grasses), therefore they are suitable for farms. Also have a mini cyclone and a double hopper. |
| ⌾ |
11-15 kW hammer impact crushers for the most convenient use in small and medium-sized farms. They are distinguished by an inclined bunker for raw materials and a wide range of configurations. Suitable for semi-automated feed preparation complexes and mini granulation lines. |
The presented models are able to satisfy the needs of small and medium-sized farms. If you need feed cutters of greater productivity, go to the sections with industrial products “Hay choppers” or “Grain choppers”.
For universal grinders are characteristic:
| ⾋ |
Universal. The ability to cope with any dry food, including stalks of reeds and corn. |
| ⧖ |
Durability. We use hardened knives from John Deere combines, we make hammers from abrasion-resistant steel Hardox 500, we balance the rotor, we supply the motor with three levels of protection; |
| ✓ |
Security. It is impossible to suffer with proper operation. This is confirmed by CЄ quality certificate. |
If you don’t know what type of feed cutter you should choose, want to buy an additional net, discuss production terms or delivery conditions at home and abroad, please contact our managers with questions.
Home
