Thank you for your interest in cooperation! The manager will consider your application and will contact you as soon as possible.
+38 050 335-47-50
+38 067 536-42-14
Back call
Read about:
exhibitions, new products, news and events at the enterprise "Artmash"

The compound feed preparation complex is a mini-line for farmers


Artmash Plant presents new equipment - a complex for the preparation of compound feeds for all types of pets. It performs grinding, mixing and dosing operations.

The product can be supplemented with a granulator and / or cooling column to create a complete feed pelletizing line.

The purpose of the equipment

The complex is designed for farms that independently produce compound feed for their animals. This not only makes sure that there are no defective or dangerous components, but also varies the composition depending on the season, age of the population and other factors.

Components of the complex:

  1. Universal feed chopper with a cyclone of 7.5 kW. Provides a capacity of up to 500 kg of ground feed per hour.
  2. Precision feed auger with mixing function and closed hopper. It is capable of mixing 600 kg of raw material in 6 minutes to a uniformity of 96%.

Complex of preparation of compound feeds: shredder + cyclone + auger mixer

Suitable types of raw materials:

  • grain (wheat, barley, corn);
  • grasses (hay, straw, alfalfa, reeds, corn cobs and stems).

You can also add other crushed components, mineral ingredients, premixes, curative and preventive additives to the mixer hopper.

Advantages of the compound feed preparation complex

Previously, we could buy a cyclone grinder and auger mixer as separate pieces of equipment.

Their combined version has several advantages:

A built-in bleach wheel allows the raw material to be transported through the cyclone directly into the auger hopper. This means that the operator does not have to monitor the filling of the bags with the ground product, and then manually overload it in the mixer. Work is done faster and labor costs are reduced.

The sealed hopper does not allow the crushed products to scatter and does not allow dust. The workplace becomes cleaner and safer for the operator.

Fine adjustment of the feed allows you to choose the most accurate doses for unloading. Bulk feed can be routed directly into the feeders or into the pellet hopper.

Artmash plant designers are ready to continue developing more convenient, productive and safe equipment to meet the needs of the most demanding customers.

Product history

A few months after its appearance in the catalog, the compound feed preparation complex became a popular basis for small semi-automated pelletizing lines. Taking into account the practice of our customers, the basic version of the shredder has been improved for more comfortable handling of raw materials that are prone to dust formation. This is described in detail in the video.

Also, at the request of customers, we began to change the basic set of equipment in the complex. Now it can be assembled from the following models:

  • Universal shredder 7.5 or 11 kW;
  • Impact hammer crusher 11 or 15 kW;
  • Universal industrial shredder with pneumatic supply of 11 or 15 kW;
  • Industrial grain crusher 15 kW, 18.5 kW;
  • Industrial hay cutter 11 or 18.5 kW.
Mixer auger
  • Standard model for 0.6 cubic meters;
  • Modified model on lowered supports with a wide cyclone;
  • Modified model with an enlarged bunker.
  • Feed 5.5 kW;
  • Feed or pellet 7.5 kW;
  • Feed or pellet 11 kW;
  • Feed or pellet 15 kW;
  • Two-speed 7.5-11 kW or 13-17 kW.
Additional options
  • Weight sensors for tracking the amount of crushed product;
  • Automation with 9 recipes and automatic crusher shutdown;
  • Hopper oil injection system.

Examples of modified feed complexes

Compound feed preparation complex Iz185 + ShS

A set of industrial grain crusher (modification with a 15 kW motor) and a mixing auger with load cells. The client makes a cereal-based feed by manually adding premixes and oil to the hopper. The set was subsequently supplemented with a feed version of the 15 kW pelletizer. We also filmed the work of a similar complex from a client from Chernyakhov.

Reduced complex of compound feed preparation

The complex is similar to the previous one, but the client had a limitation on the maximum height of the equipment. Especially for this project, a low wide cyclone with an aspiration bag was developed, which performs its functions no worse than the standard version.

Feed pelleting complex Iu11 + ShS + G11

Set of 11 kW universal crusher, standard mixing auger and 11 kW pellet granulator. The choice of a granulator is due to the fact that it is important for the client to process cereals, hay and alfalfa, as well as to make pellets from sawdust with the addition of soy or sunflower waste.

Compound feed preparation complex Imolot + ShS

Set of universal impact hammer crusher and mixing auger with load cells. Compared to the standard version, it is more efficient and easier to download. The supply of grain from the hopper can be adjusted using a gate. The tilted body allows the hay bales to be raised to a lower height and to see the cutting elements. Fully equipped, the impact crusher is also complemented by a hay feeding table.

Peat crushing complex

A peat crushing complex designed for customers who manufacture plant substrates. The auger is used to conveniently feed the raw material into the crusher. A cyclone with an outlet for two bags makes it possible not to interrupt work to replace containers. During crushing, the crusher does not spread dust, which makes it possible to work comfortably in an enclosed space.

Managers always assemble the required complete set for the client, therefore we do not indicate the cost of the sets on the website. But you can find out the current price after a 2-minute consultation by phone or in a messenger.

What has changed at the Artmash plant in 2021. Over 30 positive steps and a few unfinished business
Consider the articles of the law that regulate our activities. How we comply with legal requirements and provide information to foreign-language buyers.
The Artmash product catalog has been replenished with a new product category - industrial weighing batchers. At the moment, we manufacture semi-automatic single-channel devices that optimally meet the needs of our customers. Industrial dispensers "Artmash" are primarily designed to facilitate the packaging of feed pellets and fuel pellets. They are now included in the complete set of pelletizing lines, regardless of the type of feedstock.
We talk about the uniqueness of the new rotor-hammer crusher developed by the designers of the Artmash plant
Recently, the catalog of the Artmash plant has been replenished with the third model of a granulator with a 7.5 kW motor. Previously, we only offered pellet and feed versions, now we also produce a universal one - for all types of raw materials.
The 37 kW sawdust granulator is the largest and most productive model from Artmash. We talk about technical nuances and protective systems.
Now the equipment of LLC Artmash can be bought on credit at 0% per month for up to 36 months. No bank visit and income statement required
Clients have repeatedly asked us about a small granulator capable of processing sawdust. Designers "Artmash" took into account your wishes and developed a granulator of sawdust for 7.5 kW
Artmash Plant presents new equipment - a complex for the preparation of compound feeds for all types of pets. It performs grinding, mixing and dosing operations. The product can be supplemented with a granulator and / or cooling column ...
New auger of exact loading with a hopper of 1.5 cubic meters. designed at the request of customers who do not have enough silos of standard volume. Changing the design of the hopper made it more capacious and productive, but at the same time the equipment did not lose the possibility of fine tuning.