exit
Thank you for your interest in cooperation! The manager will consider your application and will contact you as soon as possible.
+38 050 335-47-50
+38 067 536-42-14
Back call
Read about:
exhibitions, new products, news and events at the enterprise "Artmash"

Mini auger feed mixer "Artmash" for household granulation

#

We listened to the requests of customers on YouTube and Facebook, so at the enterprise LLC Artmash, a feed screw feed mixer was designed. The combination of two products in one makes it possible to simultaneously mix and supply the right amount of raw material for subsequent granulation.

This in turn saves:

• time for accurate loading and mixing;

• money for the purchase of 2 pieces of equipment;

• the space that would be needed for the second installation.

A video was specially prepared for our customers and subscribers, in which we show the feed auger-feed mixer in action. You can be sure that your device will work in the same way, because all the equipment we manufacture is tested and checked by the Quality Control Department before painting and putting into operation.

What is the peculiarity of the feed-mixer screw "Artmash"

Our design engineer tried to develop a multifunctional device so that the operator’s work was convenient, consumables wear out less, and the raw materials did not lose useful substances during the granulation process.

Screw feed-zmіshuvach stern


Installation is convenient and practical:

  • takes up little space (650x400x41450 mm), so it is suitable for small farms or private farms;
  • does not cause transportation problems. You can pick it up at the office of the transport company, even on a small sedan;
  • provides a longer service life of the granulator consumables, since it is possible to create an optimal operating mode together with the auger.

In addition, low noise and low power consumption are the clear advantages of the feed mixer auger.
Together with the auger-mixer, our granulators with an engine power of 4 kW, 7.5 kW and 11 kW are operated.

Feed auger - Artmash feed mixer - automated installation

It is worth noting the following:

  • the auger is made in such a way that the clearance between the screw and the walls is minimal. As a result, kneading is much more efficient, while not leaving excess raw materials during unloading. This increases the productivity of the granulator;

Feed auger - Artmash feed mixer - minimum clearance between the walls and the screw

  • design prevents overheating of the mixture. Therefore, you get granules with all the nutrients that were originally in the feed;
  • economical engine with a 0.55 kW motor gearbox with a gear ratio of 1 to 50. Work occurs without stopping, slipping of raw material feed is excluded;
  • thanks to the exact loading screw, the wear of the dies and rollers is reduced, overheating of the granulator motor is prevented;
  • an automated control system minimizes operator labor.

Feed screw - feed mixer (new Artmash)

The warranty for the feed auger-feed mixer is 12 months. In addition, we provide after-sales service: we manufacture and restore the necessary components and parts.

The team of Artmash LLC, as well as our customers, is satisfied with the modification of the installation and is not going to stop there, in order to continue to amaze with the latest products of our production.

And what is your opinion on the new equipment of the enterprise LLC Artmash? We will be glad to read your feedback and suggestions in the comments.

MORE NEWS
#
What has changed at the Artmash plant in 2021. Over 30 positive steps and a few unfinished business
#
Consider the articles of the law that regulate our activities. How we comply with legal requirements and provide information to foreign-language buyers.
#
The Artmash product catalog has been replenished with a new product category - industrial weighing batchers. At the moment, we manufacture semi-automatic single-channel devices that optimally meet the needs of our customers. Industrial dispensers "Artmash" are primarily designed to facilitate the packaging of feed pellets and fuel pellets. They are now included in the complete set of pelletizing lines, regardless of the type of feedstock.
#
We talk about the uniqueness of the new rotor-hammer crusher developed by the designers of the Artmash plant
#
Recently, the catalog of the Artmash plant has been replenished with the third model of a granulator with a 7.5 kW motor. Previously, we only offered pellet and feed versions, now we also produce a universal one - for all types of raw materials.
#
The 37 kW sawdust granulator is the largest and most productive model from Artmash. We talk about technical nuances and protective systems.
#
Clients have repeatedly asked us about a small granulator capable of processing sawdust. Designers "Artmash" took into account your wishes and developed a granulator of sawdust for 7.5 kW
#
Artmash Plant presents new equipment - a complex for the preparation of compound feeds for all types of pets. It performs grinding, mixing and dosing operations. The product can be supplemented with a granulator and / or cooling column ...
#
New auger of exact loading with a hopper of 1.5 cubic meters. designed at the request of customers who do not have enough silos of standard volume. Changing the design of the hopper made it more capacious and productive, but at the same time the equipment did not lose the possibility of fine tuning.
#
Manufacture of firewood on an industrial scale requires the automation of all stages of production. Log cutting is facilitated by our chop wood splitters, but the process of loading ready-made firewood onto a truck is also a laborious and lengthy process.